Process-Informatik EtherSens Oxygen
气体值捕获和协议
O2的测量范围从%到E-24
在S7-PLC中通过TCP / IP在DB中进行数据传输
技术参数-Process-Informatik EtherSens Oxygen
电源电压 | 100-240V 50-60Hz |
功耗 | 2瓦 |
显示 | Web浏览器 1个状态LED双色 |
处理/配置 | Web浏览器 |
接口 | microSD插槽 天线连接器GSM / FME(m)(2.4 GHz IEEE 802.11b / g) 10 / 100BaseTX RJ45以太网插头 出厂设置按钮 |
工作温度 | 5 - 55°C |
外壳 | ABS塑料外壳V0 |
尺寸 | 100 x 112 x 45mm |
供货范围 | EtherSens Oxygen WIFI-stub-antenna |
Commercial data: | |
EAN number | 4260363244411 |
重量 | 0.3000kg |
订货信息-Process-Informatik EtherSens Oxygen
Art. ID. | name |
9205 | EtherSens Oxygen zirconium-probe OxygenServiceController 100% - 10E-24% |
9206 | EtherSens Oxygen Plum-O2-cell with Plum-O2-cell |
配件:
Art. ID. | name |
9230-AIO | Extension Analog-IO V1.0 Extension-board for EtherSens-devices 4 x analog IN 0-5V opt. with ext.Shunt 0/4-20mA opt. with ext. restistance 0-10/24/50V 4 x analog OUT 0/4-20mA (24V) |
9230-AIO-V1.1 | Extension Analog-IO V1.1 Extension-board for EtherSens-devices 4 x Analogue Input (switchable between U, I, differential) 4 x analog OUT 0/4-20mA (24V) |
9230-DIO | Extension Digital-IO Extension-board for EtherSens-devices 12 x digital IN or OUT 24VDC 400mA free config with software |
9230-EI2C-3.3V | Extension with ext. galv. separated I2C 3.3V Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 3.3V |
9230-EI2C-5V | Extension with ext. galv. separated I2C 5V Extension-board for EtherSens-devices with galvanic separated external I2C-connector for 5V |
9230-GG | Bigger Case Width 90mm instead of 45mm |
9230-LTE | Extension LTE-modem LTE-modem-board for EtherSens-devices Send/receive of SMS-messages Communication from/into internet |
9230-MIO-232 | Extension RS232-IO Extensionboard for EtherSens-devices V1.0 for RS232 (RxD, TxD) |
9230-MIO-422 | Extension RS422-IO Extensionboard for EtherSens-devices V1.0 for RS422 (4-wire) |
9230-MIO-485 | Extension RS485-IO Extensionboard for EtherSens-devices V1.0 for RS485 |
9230-MIO-TTY | Extension TTY-IO Extensionboard for EtherSens-devices V1.0 for TTY (incl. 2x current-sources) |
9230-RIO-230V | Extension 230V Relay-IO Extension-board for EtherSens-devices Supply voltage: 230V AC 4 x relay-OUT 230VAC/16A |
9230-RIO-24V | Extension 24V Relay-IO Extension-board for EtherSens-devices Supply voltage: 24V DC 4 x relay-OUT 230VAC/16A |
9230-SD-32 | Micro-SD-card 32GB for EtherSens-devices SDHC class 10 |
9352-WLAN-ANT | Magnetic base antenna for S7-WLAN-Bridge, WLAN-Klemme, EtherSens cable length: 3m |
9391.1 | 24V DC power-supply unit 625mA Primary 110V - 240 VAC Euro+USA-plug |
9636-CROSS | Cross-cable 3m Cat5+, shielded RJ45 plug <=> RJ45 plug, twisted pinning |
9636-TCPIP | Patch-cable 3m, Cat5+, shielded RJ45 plug <=> RJ45 plug, 1:1 |
9636-TCPIP.02M | Patch-cable 0.25m, Cat5e, shielded RJ45 plug <=> RJ45 plug, 1:1 |
9636-TCPIP.1M | Patch-cable 1m, Cat5e, shielded RJ45 plug <=> RJ45 plug, 1:1 |
传感器
Art. ID. | name |
9220-SONNE | Sun-light-sensor for EtherSens max. 220k Lux (switchable ranges) 5V DC supply (from I2C-interfaceport) I2C-connection 1m |
9220-U-I-BOX | U-I-box for EtherSens max. 1000V DC / 40A 24V DC supply 20cm power-cable 4mm2 with Amphenol-plug I2C-connection 1m |